With the path text, text runs along a line or the edge of a shape: around a circle like on a stamp or seal, in an arc over an image, or along a curved line. The text remains text. You can change it at any time, choose a different font, or straighten it again.
The line or shape along which the text runs is called path in this guide.
What you need
Suitable paths include:
- Ellipse and circle
- Rectangle, also with rounded or beveled corners
- Star
- Polygon and freehand shape
- Line and freehand line
- a picture frame in one of these shapes
The text is always a graphic text, meaning a single line of text treated like a graphic.
Text from a text frame cannot be placed on a path.
If a menu item described in this guide is missing, the function is not enabled for your user group.
How to create path text?
Set new text on a path
Example: Above a round photo, the text “Summer Festival” should be arched.
- Draw a circle or select an existing shape.
- Right-click on the shape.
- Select Text on Path from the context menu.
- The marked placeholder “Text on Path” appears on the path. Just start typing, your text will replace the placeholder.
- The Path Text palette opens automatically. There you set how the text appears on the path (see “The Path Text Palette”).
- Click next to the shape to finish the input.
On a circle or another closed shape, the new text appears at the top center. On a line, it starts at the beginning of the line.
Tip: You can also find “Text on Path” via Find Command (Ctrl+K, Mac: ⌘K) using search terms like “circle text,” “seal,” or “stamp.” The shape must be selected beforehand.
Set existing text on a path
Example: You already have a graphic text “Fresh Rolls” and want to place it on a curved line.
- Select the graphic text as an object: Ctrl+Click (Mac: ⌘+Click) on the text or select Select as Object from the context menu.
- Hold down the Shift key and click on the path. Now exactly two objects are selected.
- Right-click on the path and select Text on Path. Alternatively, you can find the command via Find Command (Ctrl+K, Mac: ⌘K).
- The text jumps onto the path, and the Path Text palette opens.
If the text is already on another path, it will only change paths. All settings from the palette remain intact.
Edit and format text
- Change text: Click in the text on the path. The insertion point appears, and you can type, delete, and highlight like in any other text.
- Font, size, color: as with any graphic text via the text bar or the character palette. A graphic text always has one formatting, which applies to the entire text.
- Tracking: Unlike straight graphic text, tracking also affects path text. This allows you to distribute the text loosely around a circle.
- Shadows and effects: affect the letters, just like with straight graphic text.
The Path Text Palette
Open the palette via the menu Dialogs › Path Text, in the context menu of the graphic text via Path Text … or via Find Command (Ctrl+K, Mac: ⌘K). After “Text on Path,” it opens automatically.
The palette applies to the graphic text you are editing or have selected as an object. Each change can be individually undone with Undo.
The fields from top to bottom:
| Field | Effect |
|---|---|
| Path | On which object the text is placed. The list shows all objects on the page that can carry text. “no path – text is straight” makes the text straight. |
| Release | The text is straight again, at the same position. |
| Alignment (left, center, right) | Where the text is anchored (see image below). |
| Other Side | The text switches to the other side of the path. On a circle, it then appears at the bottom and inside, readable from left to right. |
| Fit Size to Path | The font size changes so that the text exactly fills the length of the path. The alignment is then locked. Turning it off again returns the previous font size. |
| Position to Path | Which line of the text lies on the path: baseline, ascender, descender, or middle (see image below). |
| Distance to Path | Lifts the text off the path, in pt. Negative values push it to the other side. |
| Offset | Moves the text along the path, in percentage of the path length. |
| Start/End Distance | Free space at the beginning and end of the path, in pt. The text remains in between. |
| Distance in Curves | Balances the character spacing in tight curves (see below). 0 = off. |
| Effect | How the individual characters are positioned on the path (see below). |
At the very bottom, there is a note. It indicates how the text is positioned on this path and appears in orange if not all characters fit on the path.
Using sliders: Drag the slider or type a value into the field and press Enter. A double-click on the slider resets the value to 0. Use the arrow keys for small steps, and hold down the Shift key for larger steps.
Alignment
Alignment at anchor: left, center, right
The orange line is the anchor. “Left” makes the text start there, “Center” positions it centered above, “Right” makes it end there. You determine where the anchor is with the offset or by dragging it on the drawing area.
Position to Path
Position to Path: baseline, ascender, descender, middle
The orange line is the path. With Baseline, the letters sit on the path, the descenders (g, p, y) hang below. With Descender, the entire text is above the path. With Ascender, it hangs below, and with Middle, the path runs through the middle of the text.
Effect
The five effects: Rainbow, Distort, 3D Ribbon, Step, Gravity
| Effect | Effect | Suitable for |
|---|---|---|
| Rainbow (default) | Each character rotates with the path. | almost everything, especially circles |
| Distort | Vertical lines remain vertical, the characters are stretched diagonally. | flat arcs, waves |
| 3D Ribbon | Horizontal lines remain horizontal, the text appears as if printed on a ribbon. | Loops and ribbons |
| Step | The characters remain upright and only stand higher or lower. | playful inscriptions |
| Gravity | The characters bend with the path. | soft arcs with large text |
You can see the name of the effect when you hover over the image in the button.
Distance in Curves
Distance in Curves: off and at cap height
When text runs around a small circle on the outside, the letters spread apart at the top, even though they are evenly spaced along the path at the bottom. Inside a curve, they come together. “Distance in Curves” compensates for this.
Here’s how to find a good value:
- First, type about half the font size, so for 24 pt, that would be 12 pt.
- If the letters are still too loose at the top, increase the value. If they are too close together, decrease it.
With 0, the compensation is off.
Working directly on the drawing area
When a path text is selected, the path is displayed as dashed, and orange handles appear:
Handles of a selected path text
| What you do | Effect |
|---|---|
| Drag text | The text glides along the path. |
| Drag anchor mark | The text glides along the path. |
| Drag anchor mark over the path | The text switches to the other side, like with “Other Side.” |
| Drag bracket at the beginning or end | Sets the free space at the beginning or end (“Start/End Distance”). |
On closed shapes, anchors and brackets snap to the top, right, bottom, and left. This allows text to be easily centered at the top or bottom.
The position, size, and rotation of a path text are determined by its path. Therefore, they cannot be changed directly on the text: Move, enlarge, or rotate the path, and the text will follow it.
Example: a seal with two texts
Two texts on a circle: above outside, below inside
- Draw a circle.
- Right-click on the circle, Text on Path, and type “SUMMER FESTIVAL.” The text appears at the top center.
- Right-click on the circle again, Text on Path, and type “GARDEN CLUB.”
- In the Path Text palette, click on Other Side. The second text is now at the bottom and readable from left to right.
- Loosen both texts if necessary with tracking or “Distance in Curves.”
- If you do not want the circle itself to be visible, select it and set the stroke and fill to “none.”
Warning: Do not hide the circle. A hidden path will be interpreted as missing, and the text will then be straight.
Release text from the path
- Right-click on the text.
- Select Release Text from Path.
The text is straight again, at the same position. The same can be achieved in the palette with Release or with the entry “no path – text is straight” in the path list. If you had “Fit Size to Path” enabled, the text will return to its previous font size.
Finding the path
If the path is invisible because it has neither a line nor a fill, you can find it like this:
- Right-click on the text.
- Select Select Path.
The path is now selected, and you can move, enlarge, or format it.
Copying and Deleting
- Copy text and path together: The copy of the text is placed on the copy of the path.
- Copy only the text: The copy lies on the same path as the original, directly above it. In the Path Text palette, select a different path for it.
- Delete path: The text remains and is straight. With Undo, the path returns, and the text is back on it.
- Delete text: The path remains unchanged.
If something does not fit
| You see … | This helps or the explanation … |
|---|---|
| Note “Not all characters fit on the path.” | Shorten the text, reduce the font size, extend the path, or enable “Fit Size to Path.” Also, large values for “Start/End Distance” take up space. |
| Note “The text is longer than the circumference and overlaps.” | On a closed shape, the text runs over itself. Remedies as above. |
| The text is upside down. | The text runs from right to left there, for example at the bottom of a circle. Click on Other Side. |
| The text suddenly appears straight. | The path has been deleted or hidden. Show the path again or choose another path in the palette. |
| “Text on Path” is missing from the context menu. | Is exactly one object selected that can carry text? If text is present: exactly one graphic text and one path? |
| The fields in the palette are gray. | Select a graphic text. If it is still straight, select a path from the top of the list. |
Good to know
- One formatting per text. Those who need different fonts or colors on a path set multiple texts on the same path and move them against each other.
- Shapes made of multiple parts: If a shape consists of multiple parts, for example after “Merge,” the text only runs along the first part.
- Animation: A path text and its path cannot be animated. An already animated object cannot carry text, and an animated graphic text cannot be placed on a path.
- Transformation: A path text, its path, and a group containing one of them cannot be rotated or tilted in space. Also, “Combine Shapes” is locked for a path with text.
- Groups: The new text is placed in the group of its path and moves with it.
- Online displays: The graphic text, and thus the path text, is only available in online displays if your Stylo setup uses the new HTML export. If in doubt, ask your administration.
- Check display: Spelling and typography rules do not check the text of a path text.
- Gravity in PDF: With the “Gravity” effect, the text is output as an outline in the PDF. It looks the same but cannot be searched or copied there.
Comments
0 comments
Please sign in to leave a comment.